Gardening Tips For Maintaining Koi Ponds

Like most back yards, mine isn’t the perfect one you might see in Better Homes and Gardens. One of the biggest problems I have with it is that it has a pretty decent slope. At first I pretty much ignored it, although I was always concerned about the possibility of erosion on that hillside, especially after a good rain. But the more I looked at it the more I found myself wishing there was an easy way to make it safer and to make better use of that space.

Well there is – and you get it by building an interlocking retaining wall to provide support and create level areas you can landscape. Once completed, you just may feel like you have given yourself an addition to your current back or front yard. There are many kinds of interlocking retaining wall; you can build one out of almost anything. Among the various types of walls you can build, the most common are brick retaining walls, concrete walls, timber retaining walls, landscape retaining walls or even a variation using several in one retaining wall system. You can also build a pond with koi or different kind of fish. And to keep your pond clean you need a good pond pump. We will be discussing in details how you can choose the best submersible pond pumps in UK later in this article.

Still, for most people the interlocking retaining wall blocks are the best way to do this kind of project. Since you cannot build a retaining wall for a slope that is higher than three feet tall, it is always a good idea to sketch out a plan and measure how much height you need to enclose. If you have a greater slope height than three feet, you can always terrace the slope in sections, which can look really pretty awesome by the time you have landscaped the various sections. So look through the different sections I have here, get familiar with the various materials and the advantages and drawbacks of each type of retaining wall. There are many great books that will give you pointers and ideas as well. Here are a few:

gardening tipsIt may look intimidating at first, and even if you are using the basic interlocking retaining wall blocks you still need to do some planning. Also- there is some work to positioning them into place, but anyone who has even considered themselves a true do-it-yourself kind of person will appreciate the simplicity of building a wall from interlocking retaining wall blocks.

Buying a Pond Pump in UK

In case you have a pond, no matter what kind, a pond pump will be an invaluable asset to your water feature. The main reason is
the simple fact that without a pump, there will be no water motion. What that means is that it will be exceedingly easy for
mosquitoes and other pests to infest it and begin breeding inside. A pond full of mosquito larvae is probably not what you want.
In case your pond is supposed to be inhabited by fish, or you are specifically earning a Koi pond, you’ll need the pump to enhance
aeration of the water. Without it, the bass could possibly die. The pump will take care care of proper water filtration.

garden pondIn case You have a Koi Pond using a tumbling waterfall, a fountain that is However, not just any type of pond pump is going to do,
it has to also provide a dependable and energy-efficient performance so you can save money in your electric and water bill. Stops any Pests From Breeding in the Water Water feature. The reason that the pump is this essential tool is since that without the pump there’s no aeration occurring because it pumps the water and outside of the pond to maintain decent water flow. No water flow means you will wind up getting green stagnant water in your pond or fountain and it’ll develop into the perfect breeding ground for mosquitoes and other pests,
which will turn your beautiful watery heaven into a pit pit that is filled with dead fish and decaying plants.

Types of Pond Pumps

A pump brings your pond to life. First, there are two types of pond pumps. This is an inaudible pump since the unit is submersed in the water. Centrifugal or out of pond pumps start around $350, but they run on less electricity and pump more water. The reflections, ripples and sounds of moving water, whether gentle or dramatic, will greatly enhance the beauty of your pond and your enjoyment of it.

  • A submersible pump needs to operate while submersed in the water.
  • Since the pump is entirely submersed, it rarely overheats.
  • They last longer and have fewer mechanical problems as well.
  • More importantly, a pump will assist in maintaining the health of your pond by circulating and aerating the water.
  • If it is brought up above the water while in operation, the pump will burn out and stop working.

The pump functions by forcing water upwards, generally having water inlets either on the side of the body or through an independent inlet. These pumps will pump up to 10,000 gph. Good aeration will mean that oxygen levels in the water will be kept high even during the warmest weather, when fish could otherwise be at risk. This type of pump may be used in a fountain, a pond or a variety of water features that require a pump to push water from one point to another. The submersible pump is a preferred choice because it is easily installed and very enduring, the only disadvantage being that should the pump develop a fault, you must remove the unit from the water.

These type of pumps will produce a slight whining sound as they run so keep them as far away from areas that have seating for pond enjoyment. This type of pond pump is often called a solid handling pond pump and is used to circulate water through a pond filter to maintain good water quality and clarity. There are a variety of submersible pumps based on the type of volume needed. In a magnetic-drive pump, an electrical charge creates a magnetic field that causes the magnet on the impeller to rotate and pump water. Do not forget about running electricity to the pumps.

As removing debris and particle from the pond is essential to maintaining good water clarity, this type of pond pump should NOT have a foam pre-filter which would trap particles, but should ideally have inlet holes of at least 6mm in diameter which will allow the pump to pass the debris to the pond filter. For example: if the Waterfall is 18 inches wide, an 1800 gallon per hour pump is suited nicely. External pumps can move a high volume of water and still manage to outperform submersible pumps in energy costs. It would be smart to run the wire in 1/2 inch PVC electrical conduit piping so later you do not accidentally cut into the wire and electrocute yourself. For a gentler Waterfall, use a 900-1800 gallon per hour Pump and for a more aggressive flow use a 2400-3600 gph Pump.

Although not as quiet as submersible pumps and a lot more complicated to install, external pumps are generally more reliable. Place the GFCI outlet in a water resistant enclosure 3-6 feet from the pond and at least 1 foot above the ground. A good rule of thumb is to choose a Waterfall Pump that moves 100 gallons per hour for every inch of Waterfall width. We also carry many different types of pond pumps such as fountain pumps, solar pumps, floating fountain pumps, waterfall pumps, filter pumps, solid handling pumps, external pond pumps, the list goes on and on! Select a less powerful Pond Pump for gentle water falls and for aggressive waterfalls use a more powerful pond pump. If you can’t find the pond pump you are looking for the please contact us as we will do our very best to source it for you.

Taking Care Of Your Garden Ponds

We all love our lawns, even on those days we feel guilty with the amount of water we use to keep them beautiful and green. But on a hot day, there is nothing more refreshing to the eyes than a swath of cool green lawn.

Watch for these Problems
But sometimes when we look at our lawns we see, despite all our careful care and watering, a few bald spots. Heck – you may even see a few more bald spots than Uncle Hector of the amazing comb-over! And unlike Uncle Hector, you can’t just “comb-over” from the healthy green stuff growing all around that bald spot. You are going to need to do something, and it will involve planting grass seed along with some care to keep those tender little darlings from wilting before they grow strong enough to become a part of that wonderful expanse of lawn. I will give you a few tips about doing this as well as some tips on when to plant and the best ways to approach planting grass seed.

Combating Brown Spots
There are times when the spots outnumber the lawn and it is time for more drastic measures. This might be a good time to really think about the kind of lawn you have and if you need to be planting grass seed to change it to something that will thrive. There are many varieties available. If you are in a southern climate, planting Bermuda Grass Seed might be a good choice. If you are in a northern climate with cool seasons, planting rescue grass seed would be a better choice. Many people prefer a winter seasonal grass such as winter rye grass, which grows a lush winter lawn and is renewed each fall. If you are looking for a native grass that can withstand any weather, buffalo grass seed is an amazing choice. You only need to be planting grass seed once, and the runners take over, giving a strong durable lawn.

Planning is Always Good
Sometimes we take those lawns for granted, thinking they will just take care of themselves. But a little planning when you are planting grass seed, and in the end it will more than pay you back for the work. Your pleasure every time you walk across that lawn will grow because you know you helped to make it the beauty it is today.